Electric car charging at home
If you have just bought an electric car, or at least are thinking of purchasing one, one of the first things you’ll want to get sorted is an electric car home charger. But where do you start?
Researching the best way to charge online can be a minefield, with endless suppliers offering endless solutions with endless bells and whistles. It’s confusing. We understand. That’s why we have created this ultimate guide to charging your electric car at home.
Charging at home is one of the biggest benefits of going electric. The costs of running your car are about to fall dramatically. And smart charging with an off-peak electricity tariff can save the average driver over £200 per year. So, it’s worth making sure you get the right home charger.
What is a home electric car charger?
A home charger is a special unit - installed near your driveway or garage - that is capable of increasing the power delivered to your car. The most popular chargers are also able to reduce your cost and carbon by calculating the best times to charge, can protect your home’s fuse by monitoring by automatically reducing power if you’re drawing too much, and can speak to your solar panels to charge only when you’re generating clean power.
Some are even capable of being activated by facial recognition, controlled by a wave of the hand, or adjusted with commands from Alexa.
Future electric car chargers will also be able to discharge your car, so you can support renewables and be paid for sending electricity back to the grid at peak times, and then charge back up with cheaper, cleaner electricity in the night (this is known as ‘vehicle-to-grid’, or ‘V2G’).
Home chargers can come with a cable attached (tethered), which you just unwind and plug into your car. Or, they can come with a socket (untethered), which allows for both a ‘Type 1’ car or ‘Type 2’ car to be charged from the same charger.
More of this below... read on.
Can I get a home electric car charger?
If you have a private driveway or garage you will almost certainly be able to get a charge point installed at home. You can choose to have the charger installed in your garage, outside on the wall, or mounted on a free-standing post - we’ve seen chargers built into old whisky barrels and placed on trees. There are a couple of other criteria, but having off-street parking also gives you access to the £350 OZEV grant (more on this below).
Without off-street parking, plugging in to a nearby public charge point can be a better option than installing a home charge point. There are examples where drivers lay their cable across the pavement to charge and cover it with a protective mat to reduce the trip hazard. However, it’s best to check with your local authority before choosing this option.
Why install a home charge point?
If you have a garage or a drive-way, installing a home charger is a no-brainer. You will be able to charge:
- ⚡ Faster
- 💚 Cleaner
- 💸 Cheaper
When your installer visits to install your new charger, they will also lay a new, high powered cable to your fuse box. This allows you to charge at up to 3x faster than using your a 3-pin plug, or 10x faster If you have a three-phase power supply (which some farm houses or large home do).
The smarter chargers on the market can time your charge to happen when the grid is at it’s cleanest, or when your off-peak electricity tariff kicks in. This way, you can save up to £200 per year, and reduce your carbon usage by an average of 25%.
How to install a home charge point
Charge points are installed by government-approved installers. They are approved by the ‘Office for Low Emission Vehicles’, or ‘OZEV’, who are also the body that administer the £350 OZEV grant.
Rightcharge has built up a network of the best installers across the UK, and you can connect with the cheapest for your choice of charger by requesting a quote.
The typical process is for an installer to ask for a couple of photos of your house, including your fuse cupboard, and where you would like the charger to go. They will use this to conduct a remote ‘survey’ and provide a quote for the charge and installation.
If you’re happy with the quote, you will book a date for your installation to go ahead. Installs are usually just a half-day job, but if there is some extra work required it could take up to a full day.
The cost of a home charging point
If you are eligible for the OZEV grant, the cost of a charge point starts from around £400- £500 fully installed, after the grant.
Prices are usually based on a ‘standard install’, which, by definition, should cover most installs. But there can be extra costs involved. For example, if more cabling is required to reach the fuse box, or if you would prefer for your installer run the cable underground, as opposed to along the bottom of your wall. Occasionally, there could be other electrical equipment that needs to be upgraded in order to install the charger in line with the regulations.
Any extra cost will be included in the quote from your installer.
If you’re Scottish, you’re in luck. Not only can you be eligible for the £350 OZEV grant, but you could also be eligible for up to £300 from the ‘EST’ grant, administered by the Energy Saving Trust.
In order to claim the EST grant, your install must be completed by an EST approved installer. Any installer that you connect with through Rightcharge in Scotland will be EST approved.
One thing to note - The OZEV grant is claimed by the installer, and is knocked off the price, whereas you claim the EST grant yourself following the install. You will need to request approval from the EST too before the install is carried out.
How to save over £200 per year using a smart charger
The cheapest and cleanest way to charge your car at home is to use a smart charger, and to switch to a 100% renewable electricity tariff.
We have compiled a list of these tariffs here.
You will also find that smart chargers tend to be the cheapest option to install at the moment as the OZEV grant is now only applicable to a smart charger.
‘Smart’, essentially means the chargers can communicate remotely, which means it can do some clever things. It varies by charger, but these include:
- Know the start and end time of the off-peak period on your electricity tariff so you can tell if to only charge off-peak. Plug in when you get home, and know that the charger will only start when electricity is cheap, and end before the peak rate kicks in
- Track the carbon intensity of the electricity grid. With some smart chargers, you can set a preference to prioritise charging when the grid is at its cleanest.
Off-peak electricity tariffs can be as cheap as 5p / kWh, compared to typical unit rates of around 16p - 18p / kWh. This means that you can cut your bill by over 70% by using a smart charger to get all of your charging in the cheap hours of the night. This would cut the average driver’s bill from around £350 to £150, saving over £200 per year.
And more good news - the electricity grid is cleanest during the nighttime hours, when most power comes from either wind or nuclear. On average, it’s 25% cleaner during the night than during the evening in the UK. So, smart charging will cut your carbon too.
Differences in home electric car chargers explained
You will want to think about each of the following things when choosing your charge point. You can filter by each feature using the Rightcharge comparison tool.
- Cable (tethered or untethered)
- Fuse Protection
- Earthing rod
- Remote diagnosis
Let’s look into each in a bit more detail…
There’s a couple of things to think of here. The first is that most homes have a single-phase power supply, but some homes have a ‘3-phase’ power supply. A 3-phase power supply will deliver three times the power of a single-phase power supply. A single phase supply will be capable of delivering 7kW (kilowatts) to your charger, known as ‘Fast’ charging. If you have a 3-phase supply, and install a 3-phase charger, your charger can handle up to 22kW (also, rather unhelpfully, known as ‘Fast’ charging).
The second, is that the speed of charging can actually be limited by your car. Some pure electric cars, and most hybrids, are limited to charging at a rate of 3kW at home, which is known as ‘Slow’ charging. But a lot of cars are capable of charging at 7kW at home.
Now, if you live in a large, new home or a farmhouse, you might need to adjust everything you’ve just read. Some properties have a ‘3-phase’ power supply, which means your home can deliver 22kW to your charger (rather unhelpfully also known as ‘Fast’ charging). You will also have to check the maximum power your car can draw.
Chargers come ‘tethered’ or ‘untethered’, and often offer the option to buy as either (filter chargers for this here).
The key thing to know here is that electric cars have either a ‘Type 1’ or ‘Type 2’ socket. Type 1 used to be common, and Type 2 is now common across all new electric cars.
- A tethered charger gives you convenience because you simply need to plug one end into your car but it does mean that you can only use that charger to charge either a Type 1 or Type 2 car.
- An untethered charger means slightly more time to plug in both ends of the cable each time you charge, but gives you the flexibility to charge either a Type 1 or Type 2 car (using two different cables).
It is generally recommended to choose an untethered charger if you have a Type 1 car, as your next car is likely to be Type 2, and you don’t want to have to replace the whole charger. We would recommend a tethered charger if your car is Type 2.
It’s the most important thing to think about - so we’ve already covered it!
You don’t want to blow your home's fuse, right?
Well, some homes just have a low fuse rating… and the old solution used to be to install a Slow charger.
Luckily that isn’t the case any more. A lot of chargers come with ‘Load balancing’ functionality. Basically, this means that they are capable of Fast charging, but they will lower the power to your car if they notice that your home is getting close to using too much power.
Pretty good, hey?
Fuse Protection is particularly important to consider if you’re going to have more than one charger. Then you’re much more likely to be in danger of reaching your fuse limit without Fuse Protection.
If you’ve got solar panels then you’re surely going to want to make the most of the clean power that you generate.
A few chargers on the market can speak to your solar system. So, if you tell them to charge only on solar, they will wait for your system to be generating more power than you’re using in the home. At that point, they will switch on and vary the power going to the car to match the excess generation from your solar.
Worried about your neighbours plugging in to your charger? Although you rarely, if ever, hear of this happening, it is a key concern for some drivers. Some chargers come with a locking function.
This can be as old-school as a lock and key, or it can be a bit more advanced, with locking possible from your mobile phone, or activation with facial recognition.
Your charger needs to be earthed. If it isn’t and something trips while your charging it could be painful. The risk of this happening is small, but worth protecting against. It fact, it is a regulated requirement in the UK.
Some chargers require a metal spike, known as an ‘earth rod’ to be driven into the ground on your property. Some chargers are built with technology that intends to replace the need for an earth rod.
Being smart means chargers can report to the manufacturers, or manufacturers can access your charger remotely to try and diagnose, and even sometimes fix, errors remotely.
How to compare the best home charging points
The best way to compare chargers is by clicking 'Find your charger now' on the home page. Once you’ve chosen the charger that is the best fit for your needs, you will be connected with the right installer that offers that charger and covers your area.